首页 汽车电路图 手机电路图 mp3电路图 功放电路图 主板电路图 显示器电路图 电磁炉电路图 开关电源电路图 电视机电路图
收音机电路图 电源电路图 充电器电路图 耳机电路图 滤波电路 遥控器电路图 usb电路 放大电路 防盗报警器 振荡电路
控制电路 脉冲电路 保护电路 电话机 LED电路 电饭堡电路 热水器电路 传感器电路 小家电电路 温度计 电动自行车

首页->放大电路->正文

前一个电路图:一款高效G类放大器
后一个电路图:没有了

2W 音频放大器

2W 音频放大器

his was one of the earliest circuits that I ever designed and built, in Spring 1982. At that time I had only an analogue meter and a calculator to work with. Although far from perfect, this amplifier does have a wide frequency response, low distortion, and is capable of driving an 8 ohm speaker to output levels of around 5 watts with slightly higher distortion. Any power supply in the range 12 to 18 Volts DC may be used.

Circuit Description
The amplifier operates in Class AB mode; the single 470R preset resistor controls the quiescent current flowing through the BD139/140 complimentary output transistors. Adjustment here, is a trade-off between low distortion and low quiescent current. Typically, under quiescent conditions, standby current may be 15 mA rising to 150 mA with a 50 mV input signal.

 

相关电路图:

电缆测试电路基本RC桥式振荡电路
具有稳幅环节的RC桥式振荡电路4管发射机原理图
过零脉冲电路(实验验证过)5.1ch 功放电路
5.1c功放系统7107做的电压表(双表)
IC卡读写器原理图USB多媒体2.5W+2.5W
光控、单按键开关壁座电路几种VI转换和恒流源电路图的比较
开关电源式高压恒流源电路图门铃电路
新构思电子保险丝一个看门狗电路


电子技术下载网 | 网站地图 | 联系我们 | 免责声明 | 招聘信息 | 友情链接
Copyright © 2005 - 2007 电子电路网 - 单片机设计网下属站点